Badgerplex PRE Schism Loop Electroloop Passive Loops Contact
 
MICRO Passive Loop / Tuner Out / AB Box
One mono loop in a 1.5"x 3.62"x 1.22" (lid included in measurement) cast aluminum enclosure.

Remove cheaply buffered and non true bypass pedals from your effect chain. Switch in a series of pedals with one button, or engage a wah pedal without putting the toe down.

To tune silently leave the loop return jack open. The return is automatically sent to ground when bypassed and the output is muted.

Functions as an AB box with the loop return jack open. LOOP SEND is A-out, OUT is B-out, unused outputs are muted.

5.5 x 2.1 Negative center 9-18 volt DC is necessary for LED indicator illumination. Power is not required for loop switching.

MINI Passive Dual Loop / Tuner Out
Two mono loops in series in a 1.97"x 3.94"x 1.01" (lid included in measurement) cast aluminum enclosure. Looking down on the case with switches closest to you, the guitar input is on the right, output on the left. Loop send is the right jack of each pair.

This is about as small as 2 loops can get! only about 1/2" longer than a business card!

Tune silently by leaving the loop return jack open. The return automatically goes to ground when bypassed and the output is muted.

Easily alternate between loops by pressing both stomps at once.

5.5 x 2.1 Negative center 9-18 volt DC is necessary for LED indicator illumination. Power is not required for loop switching.