Badgerplex PRE Schism Loop Electroloop Passive Loops Contact
  

Electroloop relay based double loop
2 Relay controlled effect loops in series with ground lift on loop returns, bypass for each loop, and an invert selection switch mounted in a 4.7 " X 3.7" X 1.34" cast aluminum enclosure.

Outer switches
engage each loop⇒
LEDs Indicate if Loop is Active
   
Center switch
inverts current selection⇒
With Both Loops Off←
 →Turns Both Loops On
With L1 On and L2 Off←
 →Turns L1 Off and L2 On
With L1 Off and L2 On←
 →Turns L1 On and L2 Off
With Both Loops On←
 →Turns Both Loops Off

Removes Buffered / Amped Non True Bypass Tone Robbing Pedals, or Tuner From Your Effect Chain. Can Also Be Used to Switch In a Series of Pedals With One Button or switch in a wah without putting the toe down.

Turn both loops on/off or alternate loops using the center invert selection switch.

Relays have gold plated contacts for lower resistance and long life. Each is driven by a transistor controlled by an integrated circuit toggle.

DC Power is required for operation, effect bypasses both loops if power is lost.

Circuitry is powered through an on-board active voltage regulator so it will run on 9 to 18 Volt negative center DC with a 5.5 x 2.1 mm barrel plug.